Home > Knowledge > Content
Development status of rice mills in China and abroad 10
Dec 15, 2018

Development status of rice mills in China and abroad 10


Abroad, the VTA7A-C vertical sand roller rice milling machine (Fig. 4) produced by Satake, Japan is the most representative. Its main structure is basically the same as that in China, mainly including feeding device, whitening chamber, discharging device and suction device. , transmission and frame and other components. The main shaft is supported by cantilever, the transmission parts are located under the whitening chamber, the sand roller can be easily extracted from the top of the machine; the screen design is taken out from the side of the machine, and the screen change is quick and easy without removing the machine frame; the whitening room is almost It is twice the area of whitening of traditional equipment, and the machine has a small footprint and high output. The lower part of the whitening chamber has a rotary ejector that helps the rice bran to drain out of the machine.